Makita DMR110 Li-ion DAB/DAB+ Job Site Radio - Batteries and Charger Not Included

Product Information

Rotate the Volume/Tuning Control/Select knob until "Language" shown on the display. Press the Volume/ Tuning Control/Select knob to enter the setting. For preparation of the item being shipped, consulting an expert for hazardous material is required. Please also observe possibly more detailed national regulations. Manual tuning allows you to tune your radio to a particular DAB frequency in Band III. This function can also be used to assist the positioning of the antenna or the radio so as to optimize reception for a specific channel or frequency.

Keep rotating the Volume/Tuning Control/Select knob until desired frequency is shown on the display.

Cookie Notice

In this guide, you will find all the information you need to install the new software. System requirements Your radio will perform a full scan of the DAB frequencies. As new stations are found, the station counter on the left side in the display will increase and stations will be added to the list. Press the Advanced setting button and rotate the Volume/Tuning Control/Select knob until "Station List" is flashing on the screen. Press the Volume/Tuning Control/Select knob to enter the list of the stations. When using FM mode, your radio can be set to scan either local stations or to scan all stations including distant radio stations. Manual Tuning – FM

Connect a stereo or mono source (i.e. iPod, MP3, or CD player) to either AUX IN 1 or AUX IN 2 by audio cord.If your device has version V4.3.17-1C02E installed, you can follow the steps and install the update. Press “Advanced” again and turn the volume control 2 times to the left and confirm the input at “Software Upgrade”. Rotate the Volume/Tuning Control/Select knob to get the desired sound level. The LCD display will show sound level changes. DAB display: station name, program type, multiplex name, time/date, frequency, bit rate/audio type and signal strength Only use genuine Makita batteries. Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury and damage. It will also void the Makita warranty for the Makita tool and charger. Tips for maintaining maximum battery life

Rotate the Volume/Tuning Control/Select knob to choose "Yes". Press the Volume/Tuning Control/ Select knob to confirm the setting and a full reset will be performed. The following show the symbols used for the equipment. Be sure that you understand their meaning before use. Press the Advanced setting button and rotate the Volume/Tuning Control/Select knob until "DRC Value" shown on the display. Then press the Volume/Tuning Control/Select knob to enter the setting. The display will show the current DRC value.

Makita DMR110NW 18v LXT / 12v MAX CXT DAB+ Digital Job Site Radio White

SW Version" shown on the display. Press the Volume/ Tuning Control/Select knob to view the software version installed in the radio.