Mechanical Keyboard Switch Puller Remover Tool for Cherry/Kailh/Gateron Switches Replace

Product Information

The warranty covers all defects compared to the specification of the product in question that may arise in the product within the below-mentioned warranty period, however, with the exceptions set out below. Insert your preferred mechanical switch replacement. Ensure the pins are aligned properly. Solder the switch accordingly for keyboards that require it.

Gently pull out the switch using a switch puller. For keyboards with soldered switches, desolder the switch from the circuit board first. First, unplug the keyboard from your computer, unless you want to type random garbage in while you swap the switches. Using the switch puller that came with the K70 Pro Mini as an example, press the tool down onto the key until both arms slide down the sides of the keycap and hook underneath the edges of the cap. Once all the keycaps have been removed, use your switch puller to take out the switches. First, align the switch puller to the gaps found on the top and bottom of the switch. Once a proper grip has been established, gently pull out the switches.

Step 4: Put the keycaps on

You took that photo we mentioned right? Because you’re going to need it now. Using the photo that you definitely took as guidance, install the keycaps by positioning them on top of the stem of the keyswitch and firmly pressing down. You’ll feel a small amount of resistance as the keycap is pressed down onto the stem. When the key has been pressed all the way down, the keycap is on.

Hot swappable keyboards are great, because if you’ve gotten bored or have grown unsatisfied with how your current switches feel, you can swap them out to breathe new life into an otherwise aging keyboard.

With all the new switches installed, plug the keyboard in and open keyboard-tester.com. This will show you what key you’ve pressed. Press down on the stem of any switch to type the corresponding character in. Now find the keycap that matches and press it onto that switch with the method we described. Repeat this step over and over until all the switches have the correct keycap on. Keychron products marked as being a special or a limited edition cannot be guaranteed in case of replacement to be replaced with an identical product. It is a product that can be removed by simply putting the Gateron Switch Puller on the switch and pulling it out. The warranty does not cover the costs of consequential damage or indirect loss or any related expense of claiming under the warranty, such as loss from inability to operate the product. Products which are developed especially for use in the country in which they are sold, e.g. due to varying transmission systems and approval demands, are not covered by this warranty if defects or malfunctions are caused by the usage of the product in another country. Note that this guide is for hot swappable keyboards only. Yanking a soldered switch runs the risk of breaking the keyboard’s PCB and the switch itself.

Compared to the traditional switch puller, the Gateron switch puller is more easy to use and carry, which largely saves the time spent on removing switches. If your mechanical keyboard only supports 3-pin switches, there is still a way to use 5-pin switches. However, this involves irreversibly modifying the switches by cutting off the two extra legs. We do not recommend this method and suggest preserving the switches’ original state for future builds. Best Tools for Removing Switches Replacing switches on a hot-swap board is very simple. Just take out the keycaps and pull out the switches using a switch puller. Once the switches are out, drop in the new switches, and you’re done. Just make sure that the switches are compatible with the PCB. Consumers can still opt for the small metal puller, which is often included in the kit. that comes with their kit. However, these tend to be hard to use since they cannot properly grip the switches. The experience of using these is extremely frustrating, so we do not recommend them. The Gateron switch puller is designed to optimally and safely remove switches from a keyboard plate.Another thing to take note of is the switch compatibility of the keyboard. When it comes to hot-swap keyboards, there are generally two types: optical and mechanical. Optical keyboards are only compatible with optical switches. And likewise, mechanical keyboards are only compatible with mechanical switches. The OEM switch puller is much more useable since it is larger and allows the user to better grip the switches. The price is pretty low, but that also means that the quality isn’t great. Fortunately, Rama Works offers a better version of this keycap puller. Steps For Removing Switches Tools Needed Defects that have been caused by wrongful use, incorrect installation, incorrect repairs/modifications, or maladjustment of the product, or neglect, including but not limited to “burn in”.

The Corsair K70 Pro Mini Wireless is hot swap compatible with all 3-pin Cherry MX-style switches. It's a great place to start for getting into customizing keyboards. Step 1: Remove the keycaps But with that said, the most significant reason to remove and replace switches is experimentation. As we have mentioned earlier, there are tons of switches outside the Cherry MX series. With hot-swap keyboards, users can try out all those switches without purchasing a new keyboard.

How to swap out keyswitches: The tools you’ll need.

Switch pullers may look pretty straightforward. However, choosing the right tool is incredibly important since it can speed up the whole process and prevent scratches or damages. Out of the three switch pullers that we have suggested, we recommend using the OEM switch puller and the Rama Works puller. The warranty period starts when the product(s) is delivered to the first end-user. This warranty does not extend to any product whose serial number has been defaced or altered, just as the warranty will cease if you make modifications in the software not authorized by Keychron. I'm looking to build my own keyboard with the GMMK Pro coming out and after spending sometime watching videos/comparisons, I had narrowed down a selection of switches I'd like to try. Searching for sample kits to ensure I got something I wanted I found Mechbox! Switches are a mechanical keyboard’s most important feature. Whether talking about professional keyboards made for productivity or gaming keyboards, the smoothness, fluidity, and sound are all about the switches.