T-Cut Grey Scratch Remover Color Fast Paintwork Restorer Car Polish - 500ml plus a Wax Applicator Set with Handle * 13 Colours Available

Product Information

Here at ChipsAway we are experts in car scratch repair, and we can repair scratches that tcut usually won’t touch. Our speciality is offering an affordable and convenient service that gets your car sparkling in no time. With experts positioned and poised up and down the country, we have specialists near you. Free, No-obligation Repair Estimate T-Cut Color Fast is a revolutionary coloured paintwork renovator with Variomorphic Ceramic Technology that removes light scratches*, oxidation, ingrained dirt, bugs and surface imperfections. The coloured pigments and the SiO2 molecules enriches colour, cleans, restores and polishes in one easy application, leaving a protective shine that lasts and lasts. Step 1: An important action to ensure you carry out, is to thoroughly clean and dry the area of paint you are applying the T-Cut to, or else it could potentially damage the paintwork.

Step 5: Due to the T-Cut remove the protective layer that coats the paintwork. It should be a priority to regularly wax the vehicle, to avoid it dulling and corroding. It’s vital that all excess fluid is removed before finishing the job. If too much is left on, or the incorrect colour has been applied to scratches, it can be extremely difficult to remove. Applying T-Cut is a time-consuming process and requires additional care afterwards. If the application of T-Cut is rushed then it can lead to more expensive repairs later on down the line. Common Questions Is T-Cut safe? When using T-Cut, safety should be your priority. Always ensure you’re in a well-ventilated area and wear gloves to protect your skin. Common Mistakes to Avoid Deeper Scratches: Whilst it is good for slight, surface scratches, it’s not as suitable for scratches that are deeply ingrained in the paintwork, either accidentally created by scraping against a wall or curb, or deliberately caused by a vandal (if your car is ‘keyed’).Since the top, protective layer has been removed, the car now needs to be waxed on a regular basis to prevent corrosion. Waxing is a vital step to remember, as the last thing you want to do, when removing damage from a car, leaves it vulnerable to more damage at a later date. T-Cut Polish – Removes surface oxidation, minor scratches and blemishes, whilst providing a shiny finish to your paintwork. T-Cut Colour Fast is perfect for restoring the original colour of your car, while T-Cut Rapid Scratch Remover is a favourite for handling light scratches. If you’re dealing with metallic paintwork, then T-Cut Metallic Colour Restorer is your go-to. For those with stainless steel, Tetrosyl Cutting Oil will be your best friend. Instructions for Using T-Cut on Your Car’s Paint As mentioned a couple of times through this article – there are several times where T-Cut is not the right solution. If tcut is not right for you, if the scratches are too deep or if you want expert guidance when fixing scratches to avoid any accidental damage, then this is where ChipsAway come in. Whether you’re contending with the rigours of daily commuting or the fallout of a minor mishap, maintaining the integrity of your car’s vehicle paintwork can pose quite the challenge. Over time, cosmetic damage, such as minor scratches and minor marks, can detract from your vehicle’s appearance. Thankfully, the T-Cut Solution can help restore your car’s former glory. What is T-Cut?

Regardless of what type of car paintwork you have, T-cut can be used. For some additional uses, it is suitable for our boats, caravans and around the housework. How To Use T-Cut Correctly Step 4: After rubbing until the scratch is no longer visible. You should use a second clean microfibre cloth to wipe away any remaining solution.Not all surfaces are made equal. T-Cut Solution works best on metal surfaces and paintwork with a glossy finish. Using it on matte paint finishes or non-metallic paintwork can cause more harm than good. Time is of the Essence Essentially, T-Cut is a good short-term solution, as it will primarily provide your car with a shine. Whilst also removing any light scratches or marks. But this is temporary, as the paint will eventually fade, so a longer-term solution would be a new paint job. For a car with dull and fading paintwork. When Is T-Cut Not Suitable For Use?

Yes, by removing cloudiness from clear, plastic headlights, T-Cut can be used to restore headlight clarity, which will then result in the visibility of light to increase. This can also be applied to windows and plastic glass, which will enhance the clearness whilst adding a shine. A small amount of T-Cut should be able to remove spray paint from your car paintwork. As with all applications, it needs to be applied very carefully to ensure that further damage is not attributed to the care whilst removing the spray paint. Which T-Cut to use? This process can be applied to a small area of a car, such as a wheel arch, or it can be applied to much larger surface areas. If the latter is the case, then tcut will need to be applied all over, one panel at a time, and will requires several containers of tcut to ensure you have enough of the compound. If, for instance, you want to restore an old paint job all over a car, the process is the same as with a smaller area, but it is a more laborious job. Every panel will need to be treated, one panel at a time, to ensure an even application. The maintenance afterwards will also be more intensive, since the car will regularly need to be waxed all over. T-Cut After CareEffective use of T-Cut isn’t just about the application; it’s also about choosing the right product for your specific needs and observing safety precautions. Choosing the Right Product The frequency of using T-Cut depends on the condition of your car’s paintwork. Generally, for maintaining brilliant shine and dealing with minor scratches, T-Cut can be used every 3–6 months. A surface scratch is determined by feeling no obstruction when passing a fingernail over the mark. If an obstruction is noticed, it will be deeper than a surface scratch and this product can only help in improving the appearance of the scratch. Next comes the application. Working in a circular motion, rub the solution over the scratched area, applying firmly to ensure it gets into the grooves of the damage (especially with coloured T Cut). In many cases, the cloth changes colour as the top layer of paint is removed. Don’t worry, that is perfectly normal although it is not the case with metallic finishes as the lacquer on these is clear.

Step 6: If you feel your whole car needs a paintwork restoration. You would have to ensure you are ready for the lengthy and strenuous task, as each section of your car would need to be treated separately. Also, it would require a more thorough after-care. The whole car would need to be waxed to prevent the paint from dulling. There are other cases where applying tcut yourself, or trying to repair the scratches yourself, are not recommended. If you are unfamiliar with repairs Yes, T-Cut can be used on all paint colours. However, certain products, like T-Cut Colour Fast, come in different versions to better match a range of paint colours. How Often Should I Use T-Cut on My Car? Sometimes, the first thing that will come to your mind is if you can fix it yourself. Thankfully, there are many products out there that are specifically made for removing scratches, one popular one being T-Cut. Read on to find out the details of the product, including a step-by-step guide on how to use it! What Is T-Cut Scratch Remover and what is it suitable for? Yes, T-Cut can help remove excess lacquer. Lacquer overspray can easily be removed with the Original T-Cut cutting compound. Can it remove spray paint?ChipsAway specialists are experts in car scratch repair. We have a unique and fully mobile paint matching system they use means that, not only are you removing the scratch, but repainting it with the correct, precisely mixed colour and finishing it with the same lacquer seal as before. As this process restores the damaged area, there is no need for time-consuming waxing afterwards.