276°
Posted 20 hours ago

SP2B Flowflex in Line Micro Pump, The Shower Power Booster is an Easy, Efficient & Effective in Line Micro Pump, DIY Solution to Poor Water Pressure, Suitable for All Plumbing Systems.

£66.495£132.99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

bars of pressure, or between 6-8 litres/minute of flow, all while using just 5% of the energy required by traditional pumps. The Shower Power Booster uses a safe 12V DC power supply which can be plugged into any conventional 3 pin plug in your home. TapBoost provides an easy to install, quiet, cost-effective solution when a tap, toilet, dishwasher or washing machine suffers with poor water flow. Designed to work in houses with low-pressure systems, shower pumps are the ideal solution to increase the flow rate of your shower, improving your shower experience.

Remove any shower head, fully turn on the shower and plug the power supply directly into the white motor (bypassing the electronic brain). Low voltage, brass-bodied and built with anti-vibration feet, the Monsoon is one of the best shower pumps ever made.Luckily the In-Line Micro Pump delivers a flow-rate just short of this maximum limit, allowing you to conform to the water bylaws. uk/in-line-automatic-shower-power-booster-sp2b-22904/ 43955 SP2B In-line Automatic Shower Power Booster https://www. In particular the HW feed used to be very poor due to air in the system - the pump eliminates this entirely. Besides being incredibly popular online, it uses a lot less energy overall than traditional shower pumps, its suitable for any plumbing system, fits any angle or orientation and even retro-fits, features an easy 3-step install process, doubles your flow of around 6-8 Litres per minute and more!

Shortly after I bought my first house 8 years ago, I needed a solution to poor gravity fed shower flow without using power hungry pumps that waste energy producing heat, noise and vibration. All our shower pumps are sourced from the UK’s top brands, ensuring that we deliver only the best in quality and reliability. This was done at the factory, so you should not find a problem, but for peace of mind a pre fitting check is recommended.I fitted this as per instructions to the hot water taps and although they are better it's not a great improvement. If you’re only experiencing pressure issues with one water supply, a twin shower pump is an ideal solution that can work with the cold and hot water supplies separately. We had several plumbers advise that we would have to install a big old style pump and so glad we avoided the nightmare consequences which would have followed had we taken their advice rather than install the ShowerPowerBooster.

We have been manufacturing shower pumps for over 30 years, constantly innovating, and using cutting-edge technologies to develop new products and to ensure our products are some of the most quiet, compact, and reliable on the market. A compact and powerful pump set, it can be retro fitted to any shower, tap or hot water system to boost water pressure or flow. lpm TapBoost will increase the flow up to 7lpm (provided there are no restrictions in the pipework/outlet). Being Elect Mech Engineer, I think this best simplified solution to problem with low level storage tank (low water pressure).For homes where low water pressure is a problem, shower pumps help to ensure a steady flow of high-pressure water to the bathroom. I fitted this to my hot water tank its an absolutely fantastic bit of kit I have gone from a trickle of water to a great flow and it only took 15 minutes to fit once all the fittings were obtained. The in line design means that pumps can be easily installed where ever is most convenient and for peace of mind all pumps are WRAS approved and tested by UK Manufacturer’s Flowflex in their Buxton factory. I still can't believe how none of the major pump manufacturers hadn't come up with such a simple design before. No matter what your current system is, we have a pump that can improve the overall performance of your particular shower.

The mix of brass and plastic is sturdy yet cost-effective, making it a reliable choice for your household, even if you have a fairly conservative budget to work with. Yes, however there must be sufficient natural flow/pressure to allow the electric shower to operate before installing a TapBoost. For many homes in the UK, particularly those in rural and semi-rural areas, one of the key issues day to day is the mains water pressure available to the property. This delay is deliberate and allows pumps to deal with air entrained in a system and is not a fault. Using patented NVR technology and anti-vibration feet, the CT force range is one of the quietest booster pumps on the market.Internal impellers increase the amount of water passing through the unit by spinning it quickly and firing it out the other end. The pumps took about 20 minutes each to fit but I then took another hour sourcing the power, needs no electrician but make sure you can make a permanent route to electric before purchase, most bathrooms have no power points for safety reasons. Please note that after switching off the flow switch will delay switching the pump on again for up to 20 seconds (depending on switching program). This ensures the pump’s ability to start each time, making it the ideal choice for systems that have the showerhead installed at the same (or higher) height as the cold water tank.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment